Three in one wireless charger PCBA board, ten watt fast charging board, high-power wireless charging and transmitting module
Product Feature:
1. Input voltage: DC9V1.5-2A. If the voltage exceeds this range, an alarm will be triggered and charging will stop
2. Output voltage: 9V ± 0.1V,
3. Charging current: 1200mAh
4. Charging power: up to 10W compatible with Apple 7.5W
5. Conversion efficiency: greater than 75% with FOD foreign object detection.
6. Transmission distance: maximum 8mm, recommended transmission and reception spacing of 2mm~4mm
7. Standby power consumption: average power consumption less than 50mW
8. Over temperature protection: When the temperature is above 60 ° C during charging, it will automatically stop charging for 1 minute. After the temperature drops, it can be recharged. The normal temperature for 10W fast charging is 40 ° C.
9. Overcurrent protection: Automatically stops charging when the output current exceeds 2A during charging to prevent damage to the charger
10. Execution standard: Qi wireless charging standard
11. Product certification: CE/FCC, compatible with QI certification standards
Description of watch panel functional parameters:
PCBA size: 26 * 26mm
Coil size: 26 * 26mm
Input power: 5 watts
Launch distance: 5-8 mm material
Charging current: 1000mAh
Output power: 5V -1A
Frequency: 110-205 kHz
Efficiency conversion: 76%
Product standard: Qi
Supports 1/2/3/4 generations
Protection measures: overcurrent protection, over temperature protection, short circuit protection
About Application
About customization
Delivery display
